Thursday, 12 October 2017 10:24

October Launch is GO

UROC's upcoming launch for October 14 is a go. We anticipate the launch only taking place on Saturday (Oct 14) as opposed to a two-day launch due to the low temperatures but it looks like we should have a pretty good day.  A porta pottie will be onsite and the trailer is expected to roll in around 830am or so on Saturday morning. The more folks we have to help set the equipment up the quicker we can get flying. We do expect winds to increase later in the day so the earlier we can get the launch system up and running the more flight time we will have.

Details about the October Launch

Contests being held at the October Launch

Launch Site Information

Published in UROC News
Tuesday, 26 September 2017 21:41

Contests at October Launch

It's safe to say that Halloween is many people's favorite holiday. This appears to be the case with Mitch. He has come up with a couple of contests for us to participate in at the UROC Launch in October (14 and 15) to get us all in the Halloween spirit.

1. Best Halloween themed/decorated rocket - Entries will be judged first. The highest ranking rocket to successfully fly safely is the winner. Mitch will be providing prizes for these contests (thanks Mitch!) Fiirst prize is two G motors. Second prize is a Quest kit.

We will also be holding a "Most Repeated Flights" Contest, basically, whoever has the most successful, safe flights with any one rocket during the October launch will win. Same prizes for this contest as for the Halloween contest (Thanks again Mitch!).

In the event that a minor wins the first in either contest, the motor will be presented to their parents or guardian.

We'd really like to thank Mitch for the donations and the great ideas for the contests and would very much like to ask everyone to participate. We've got a few weeks to go before the launch and really looking forward to some greatr competition!

This launch will be held as a two-day event if the weather is cooperative. We have permission from the BLM for overnight camping at the launch site. We invite members to camp out Saturday evening and take advantage of the great weather early on Sunday as well. This launch will be held under the Tripoli Research rules. Also be aware that only members of UROC are allowed to participate in the launch. If you are not a member you can sign up online or at the launch.

As always, we will need help running the launch, RSO, LCO, pad managers and lots of help setting up and tearing down the range. We do have a Porta Potty ordered for this launch. Set up is expected to begin around 8:00 am and we will fly in to the early afternoon or until the wind gets to be too strong and if the weather permits maybe start up some model rocketry in the evening. 

Sunday morning should prove to be some excellent flying time. The range should be set up, ready to go long before the wind catches us.

If the weather conditions for the upcoming launch deteriorate or if the fire hazard becomes too high, we will try to notify everyone via our normal modes including the website, facebook, and twitter.

View Launch Safety Codes

Published in UROC News
Thursday, 01 June 2017 11:23

KEMM Contest Results

The Ken Eva Memorial Meet (KEMM) took place on Saturday, April 22 out at Frank Hunt Field. The weather was very cooperative and there was a fairly good turn out for the competition.

We had some scouts set up launch pads to handle their launches to gain their rocketry badges as well. There were 11 contestants in the competition and some great flights. Matt Goode was the meet champion followed closely by Bruce Bell.

Results for individual events are listed below. The next NAR competition event is Pioneer 2017 and it takes place Saturday, June 3 at Frank Hunt Field as well. 

You can view photos from the launch in the UROC Gallery

 

Ken Eva Memorial Meet 2017 Meet Champions

 

PlaceContestantNAR NumberSectionTotal Points
C Division
1 Goode, Matt 100903 523 2016
2 Bell, Bruce 20636 523 1524
3 Bell, Sally 85169 523 672
4 Redd, Randall 6333 523 324
5 Snaufer, Mark 29609 523 120
6 Steele, Carrie 78080 523 60
6 Steele, Cassidy 81474 000 60
6 Steele, Katie 80121 000 60
7 Steele, Cody 46810 000 30
7 Stewart, Pearce 101610 000 30
8 Morstadt, Bob 60107 000 0
T Division
1 Team, Pod Bay Doors T-201 523 2400
2 Team, Pod Babe Doors T-202 523 1224
Sections
1 UROC   523 8340
2 IND   0 180

Ken Eva Memorial Meet 2017 Standings

 

Sport Scale

PlaceContestantNumberSectionPrototypeStaticFlight 1Flight 2TotalPoints
C Division
1 Bell, Bruce 20636 523 D-Region Tomahawk 570.0 98.0   66800 600
2 Goode, Matt 100903 523 Space Shuttle 470.0 140.0   61000 360
3 Bell, Sally 85169 523 IQSY Tomahawk 460.0 100.0   56000 240
-- Redd, Randall 6333 523 Jupiter 535.0 0.0   0 0
T Division
1 Team, Pod Bay Doors T-201 523 Sandhawk 600.0 100.0   70000 600
2 Team, Pod Babe Doors T-202 523 D-Region Tomahawk 530.0 100.0   63000 360

 

C Egg Lofting Altitude

PlaceContestantNumberSectionFlight 1Flight 2TotalPoints
C Division
1 Goode, Matt 100903 523 185   185 540
2 Bell, Bruce 20636 523 182   182 324
T Division
1 Team, Pod Bay Doors T-201 523 381   381 540
2 Team, Pod Babe Doors T-202 523 88   88 324

 

A Helicopter Duration

PlaceContestantNumberSectionFlight 1Flight 2TotalPoints
C Division
1 Goode, Matt 100903 523 62   62 600
2 Bell, Sally 85169 523 31   31 360
3 Bell, Bruce 20636 523 28   28 240
T Division
1 Team, Pod Bay Doors T-201 523 48   48 600
2 Team, Pod Babe Doors T-202 523 20   20 360

 

1/2A Streamer Duration Multiround

PlaceContestantNumberSectionFlight 1Flight 2Flight 3Flight 4TotalPoints
C Division
1 Bell, Bruce 20636 523 36 24 32   92 360
2 Goode, Matt 100903 523 32 33     65 216
3 Redd, Randall 6333 523 50       50 144
4 Bell, Sally 85169 523 28       28 72
T Division
1 Team, Pod Bay Doors T-201 523 52       52 360
-- Team, Pod Babe Doors T-202 523 SEP       0 0

 

Random Duration (90 sec)

PlaceContestantNumberSectionFlight 1Flight 2TotalPoints
C Division
1 Goode, Matt 100903 523 2.2% (88 s)   22 300
2 Redd, Randall 6333 523 12.2% (101 s)   122 180
3 Snaufer, Mark 29609 523 46.7% (48 s)   467 120
4 Steele, Carrie 78080 523 68.9% (28 s)   689 60
4 Steele, Cassidy 81474 000 68.9% (28 s)   689 60
4 Steele, Katie 80121 000 68.9% (28 s)   689 60
5 Steele, Cody 46810 000 77.8% (20 s)   778 30
6 Stewart, Pearce 101610 000 87.8% (11 s)   878 30
-- Bell, Bruce 20636 523 DQ   0 0
-- Morstadt, Bob 60107 000 DQ   0 0
T Division
1 Team, Pod Bay Doors T-201 523 CAT 67.8% (29 s) 678 300
2 Team, Pod Babe Doors T-202 523 CAT 78.9% (19 s) 789 180

 

Published in UROC News
Friday, 24 March 2017 01:15

First Launch of the Year

The first UROC launch for 2017 was held on Saturday, March 18 and into Sunday March 19. We had a good number of people attend over the two days and in general the launch was a success. We had the trailer onsite Friday night so we were ablle to begin setup early on Saturday morning. We had a good number of helpers to carry pads out, set up the range marking and wire the control system. The launch was set up as a Tripoli Research launch and we had pads set up for Model Rockets up to non-complex M motors. The largest motor flown over the weekend was an L and it was a succesful flight. FAA coordination was handled by Jim Yehle and went smoothly. Our waiver was open from 8am to about 5pm on Saturday and until we closed up operations on Sunday around 2pm.  

Overall the launch was great, highlights included beautiful weather on Saturday and Sunday morning. Of course wind picked up around 12:30 and lasted most of the rest of the day Saturday. It was never strong enough not to be able to launch but folks were tired and the night launch just didn't happen. We had a good number of people camping out on Friday and Saturday night in rigs ranging from tents to big fifth wheel RVs. Everyone had a great time talking, listening to music at cooking meals. 

Here is a link to some photos from the launch 

If you attended the launch and have some photos or videos you like to share please submit them to the website.

Published in UROC News
Tuesday, 21 February 2017 17:27

HellFire 22 Dates Announced

HellFire, sponsored by the Utah Rocket Club (UROC)  takes place this year August 3,4,5,6. Though HellFire is technically an amateur launch, we’re talking serious rocketry here. Participants from around the country launch rockets ranging from foot-tall wonders to towering monsters that weigh in at over one hundred pounds, feature high-tech electronics, use a propellant similar to that used on the space shuttle, and lift off with 750 pounds of pure thrust.

Now in its 22nd year, HellFire continues to grow. Many people attend not to launch, but simply for the thrill of watching. Between launches, visitors enjoy examining rockets and components close-up and speaking with the experts who build and launch them.

Spectator Admission to HellFire is free and the public is welcome. HellFire will be held on the Bonneville Salt Flats near Wendover, Utah. Take Exit 4 on Interstate 80 and follow easy-to-spot signs. The event takes place 9 a.m. to 5 p.m. Thursday, August 3 through Sunday, August 6.

Discounted registration for flyers is available for UROC members.

Many more details to come over the next weeks.

Tips for visitors:

  • According to UROC insiders, Saturday is the day “where it starts getting crazy” with “lots of flights.”
  • All launch plans are subject to weather. Visitors are encouraged to check www.uroc.org BEFORE driving out to the launch.
  • There are no food or drink vendors at the event, so UROC reminds visitors to bring binoculars, hats, chairs, shade, lots of sunscreen, food and snacks, and plenty of drinking water.
  • UROC strongly encourages spectators to leave their pets at home, this is not a pet friendly environment
Published in UROC News
Monday, 16 March 2015 12:07

March Launch Looks Promising

UROC's planned NAR Sport Launch scheduled to take place on March 21st appears to be a go! UROC President Ken Park recieved notification from the BLM SLC Field office that the launch site has been cleaned up and our documentation is in place. Additionally, the FAA waiver is in place and will be activated if the launch commences. The weather appears to be cooperating for this launch and we will continue to update the UROC.org website with any further news or announcements regarding the launch. 

It's time to get out there and fly!

Click this link for all of the Launch Site Details

 

Published in UROC News
Thursday, 29 January 2015 11:51

And Now, a Little Good News...

UROC president Ken Park recieved a phone call today from the BLM agent responsible for taking care of the recent toxic waste spill at our Frank Hunt Field launch site.

See Article

The agent reported that the clean up is already in progress and they fully expect the launch site to be available for our February 21st Research Launch! This is much faster than any of us expected. Of course things change so please watch this site for further details and updates about the upcoming launch.

UROC would like to thank the BLM Salt Lake Field office for responding to this issue as quickly and professionally as they have. We really appreciate their support and assistance!

With this new, the new 2015 flying schedule will be posted to the website shortly. Stay tuned!

Published in UROC News
Tuesday, 05 August 2014 22:29

HellFire 19 - The View From On High

HellFire 19 – The View From On High
By Frank Whitby
 
In case you ever wondered, HellFire can be seen and enjoyed, as a spectator, from 4 miles away and 2000 feet above the salt.   My friend Joe Zachary accompanied me on a West Desert Adventure to photograph HellFire 19 from the top of a nearby mountain on the edge of the Bonneville Salt Flats.  
 
For the purposes of this adventure, we decided to hike to the top of Lamus Peak, elevation 6284 ft., coordinates  40.88530°N / 113.8341°W, the 5th peak of the Silver Island Mountains on the northwest side of the salt flats.  You may have noticed these barren rocky summits to the North and West of the salt flats.  Once the HellFire 19 flight line had been established, Lamus Peak turned out to be essentially due north of the launch site.   There are other nearby summits that might serve as a viewing platform, including: Floating Island Peak – half as tall, three times further away; Jenkins Peak – somewhat further away north of Lamus Peak, taller, and more difficult to climb; Tetzlaff Peak – similar distance from the launch site as Lamus Peak, slightly lower elevation, probably would be a good choice as well.  
 
A short 4-wheel drive track up a canyon on the southwest side of Lamus Peak provided a good starting point, leaving a hiking distance of only about 1 mile and 1200 feet elevation gain.   The short hiking distance and modest elevation gain suggest an easy hike.  Without formal hiking route information, and no obvious trail to follow, we picked out way up the west face of the peak.  The approach is straightforward scrambling through scratchy bushes, gravel, and scree.  Cliff bands of class 4 climbing with substantial exposure high on the face allowed us to gain the west ridge just below the summit.  Hiking time to the summit was about 2 hours.  
 
We set up our sun shelter/tarp on the summit at about 9:30 and soon observed Jim Yehle’s hybrid launch with the distinct sputtering sound of the motor reaching us about 20 seconds after the launch.  This was soon followed by a couple of highly visible smoky motor launches that I assumed to be J or K motors.   We were 200 feet above the salt and we estimated that we were 4 miles straight-line distance from the launch site based on the time it took for sound to reach us.  With the naked eye the flight line of vehicles could be seen to grow as the morning progressed.   The mid, far, and away pads were barely discernable without binoculars.
 
We stayed on top, observing and photographing as much as possible, and trying to stay out of the sun.  We witnessed the unfortunate demise of Sir Winston and got photos of Neal Baker’s successful Level 3.   With binoculars we could tell when people were loading rockets on the pads and we could estimate impending launches based on when the range was clear.   All of this required diligent observation with binoculars and telephoto lens for hours on end, while hunched under our feeble sunshade in a cramped cross-legged sitting position.   Fortunately we had foam pads to sit on and we had cell phone and 4G wireless services, allowing us to communicate occasionally with Neal to anticipate launches.  We packed up and headed down late in the afternoon, exposed to the full scorching sun on the south face of the peak.  
 
Is Lamus Peak a great place to observe HellFire?  That depends on your personality and your definition of great.  If you enjoy hiking and bushwhacking in remote rugged terrain with no respite from the sun, then you should go.   If the intense heat of the salt flats is already enough for you to deal with, without adding serious physical exertion and exposure to significant risk of fall, then you might prefer to observe from the flight line.   If you dislike looking up and straining your neck to watch launches, then you might skip the flight line and go to the top of the peak where you observe looking down and straight out.  From Lamus Peak the rockets are far away, you have no idea who is launching or when they might launch, and you see mainly just a smoke trail or a bit of flame.  We were unable to see any rockets under chute.  Recall too that you must carry everything you need on your back.  We carried nothing extra, just binoculars, camera, telephotos lens, tarp, water, and foam pads to sit on.  The foam pads were critically important, as we sat all day on the sharp rocks waiting to photograph launches.  On balance, I love an adventure and this was a fun trip that required minimal planning and preparation and provided a unique rocketry and wilderness experience.
 
If you go, check out summitpost.org for a route description.   We somehow failed to do this, and as such we missed the fact that there is an easier route that starts at the same spot and loops through a canyon on the west and north sides of the peak to access the north ridge high on the mountain.   We instead picked our own route and descended the same we went up.  After reaching the summit, it was not obvious to us that there might be an easier way down so we felt safest reversing our course.  There were some tricky parts where good balance, modest rock climbing skill and steady nerves were necessary.  The southwest side of the peak looks like it offers some interesting technical rock climbing opportunities for the intrepid climber.   The rock is solid, volcanic rock with very sharp edges that cut and scratch easily.   The better season to climb would be fall, winter or spring, but that would preclude watching HellFire from the summit.  I would discourage anyone from taking their dog up the peak without some sort of foot protection given the sharpness of the rocks.  A dog would have to be carried up and down the upper portion of the route that we followed.  The only other peak of the Silver Island Mountains that I have hiked up is Floating Island Peak, which is a much easier, shorter climb, and would be a good choice for your dog.
 
Map of Lamus Peak
 
Published in Focus
Thursday, 07 February 2002 17:00

Rocketry Rules of Thumb

First, please read the fine print... There are many different solutions to the rocket design challenge. Rules of Thumb simply provide a solid starting point that many have found useful in the past, and that will, in many cases, provide a suitable solution for your design problem today. Rules of Thumb are guidelines. They're not laws. They are nominal solutions that usually, in many cases, most of the time, get the designer in the right ballpark. Once a rocket designer's judgement has been formed by lots of experience, some Rules of Thumb can be stretched, bent, stood on their head, or ignored completely.

Using Rules of Thumb certainly does not take the place of stability tests, or attention to safety. Proof of stability and a constant focus on safety are the most fundamental and unchangeable Rules of Thumb I know. If you know Rules of Thumb that are not mentioned here, e-mail them to Tom Savoie and they could appear in a future update with your name as the contributor. Comments are always welcome.

General Design

Motor Mount Size
Build your rocket for the largest motor you might want to fly in it. You can always adapt down, you can never adapt never up.

Paint Selection
Whatever your choice, use a primer, finish and clear coats that are compatible. Many times this means sticking to the same brands-e.g., Krylon primer, Krylon finish coat, and Krylon clear coat.

Airframe

Diameter And Length Of The Rocket
The ratio of rocket length to diameter, sometimes referred to the aspect ratio, should be from 10 - 20:1. For example, a six inch diameter rocket would mean a length of 60 -120 inches.

Reinforcing the Airframe
The larger the rocket, the more important reinforcement becomes. Two layers of a lighter fiberglass fabric work better than a single heavy layer. Two layers of 4oz fiberglass works well for 3-4 inch rockets, 2-3 layers of 6oz for 5-7.5 inch rockets. A final wrap of 2 oz glass provides a good sanding veil. Glass a rocket measuring 2.56" or greater that will reach equal or greater than 0.85 Mach.

Fins

Fin Dimensions
A fin that is 2 diameters of the airframe in root length and span and a chord length of about 1 diameter will be effective.

Fin Shape or Planform
The shape you see more than any other is called the clipped delta, and is known for its effectiveness. The clipped delta resembles a parallelogram, with the fin swept somewhat to the rear. The root and chord lines are near parallel, and the leading and trailing edges are near parallel. There are many, many shapes that will get the job done. Some look cooler to me than others. One of the most efficient fin designs looks like a simple rectangle attached to the tube.

Shaping the Fin
The leading edge of the fin should be rounded, the trailing edge shaped like a V. The chord edge should remain square.

Number of Fins
Three fins will almost always do the job. Four fins work too, but only marginally better as far as improving CP. Some have said that four fins reduce wind-induced spin.

Recovery

Black Powder Ejection
Use enough BP to yield a 15 psi pressure within the airframe. See article on Ejection Charges for a detailed discussion.

Sizing The Parachute
You want your rocket to descend at about 15 feet per second under nominal conditions. Slow it up over playa and concrete. Use 3.5 square feet of chute per pound of recovered rocket weight. Determine chute size by doubling the square root of the weight of the rocket. For example, a 16 pound rocket would use a 2X4=8' chute. A 49 # rocket would use a 2X7=14' chute.

Streamers should be 10 times as long as they are wide.

Drogue recovery descent should be about 50 ft/sec.

A full-hemispherical canopy has very little performance gain over the more efficient and less bulky quarter-spherical--the top-half of a full-hemispherical chute.

Recovery Harness Strength
Tensile rating for recovery materials should be at least 50 times the static weight of the rocket.

Sizing Tubular Nylon
9/16" serves well in rockets up to 15 pounds. Go with 3/4 up to 30 pounds. 1" up to 50 pounds.

Length of model rocket shock cord
Make shock cords for model rockets a minimum of 2 to 3 times the overall length of the rocket. Middle or high power rockets should use tubular nylon at least 5 times the rocket length.

Wadding
Use enough wadding to fill 2 x the diameter of your BT. Any more is probably overkill. Any less may allow hot particles through to hit your chute. Do not pack it tight.

Knots, Loops and Sharp Bends in Shock Cord or Bridle
Knots, sharp bends, including sewn loops, in the tubular nylon or flat webbing will weaken its load capacity by 50%.

How Tight is Tight?
Many people use masking tape to finesse the fit between an airframe and a coupler that must separate at deployment. A common question is: how tight do I want it to be? Use enough masking tape so that you can pick the rocket by the nose cone without the rocket coming apart. If you vigorously shake the rocket up and down, and don't see any movement off the coupler, you've probably got too much tape on, Jack.

Piston Deployment
Use 25% less Black Powder if your deployment system is piston driven.

Piston Maintenance
Running a damp cloth through your airframe after flying will clean out powder residue and keep your piston moving freely.

Shear Pins
Use shear pins on any rocket where you need a little extra piece of mind to know everything will stay in place until the proper time. Use 1/16" styrene rod or #2 nylon screws on almost any high performance rocket. For example two styrene shear pins each on a 2.6" phenolic airframe, 4 nylon screws on a 6" bird. See the article on Shear Pins in the CONSTRUCTION area for more detail.

Shortening Delay Elements
Note: Adjusting the delay as described below is considered a modification to the motor and is therefore against the rules in a TRA/NAR sanctioned launch. Delay grain burns at the rate of 1/32" per second. Shorten delay time by drilling a 1/16" bit to drill a hole into the ejection charge end of the delay. Drill to a depth of 1/32" for every second you want to shorten the delay. A piece of tape wrapped around the drill bit at the proper depth will help ensure an accurate depth. Don't drill more than 25% into the length of the delay.

Stability

Margin of Stability
The CG should be forward of the Center of Pressure by 1-2 calibers. A caliber is simply the diameter of the bird. One caliber of stability is also known as a margin of stability. In other words, in a four inch rocket, the CG must be ahead (closer to the nosecone) of the CP by 4 - 8 inches. More than .5 but less than 1 margin of stability (less than one caliber) and a rocket is "marginally stable'. More than two calibers of stability is known as "over stable". An over stable rocket will tend to dramatically turn into the wind. A marginally-powered, over stable rocket can end up almost horizontal.

Adjusting the Center of Gravity
To move the CG forward, add weight to the nose, lengthen the rocket, or lessen the weight in the aft end of the rocket. To move the CG aft, (for example, if your rocket is overstable), do the reverse.

Adjusting the Center of Pressure
To move the CP aft (more stable), increase the size of the fins. To move the CP forward, decrease fin size.

How Long is Too Long
A rocket must maintain its rigidity in flight. Any tendency to bend will be magnified in flight resulting in a kinked tube and likely a failed flight. If you hold a rocket horizontal by its tail section and notice any curvature in the rocket, your bird probably isn't stiff enough. Sorry, rocketeers, Viagra will not cure this problem.

Propulsion

Sizing the Motor
In selecting a motor to power your rocket, you need to have at least a 5:1 thrust to weight ratio. See a detailed discussion of this guideline Motor Selection in the PROPULSION area.

Launch Operations

Launch Rod Diameter
Determine by motor size:
A,B,C - 1/8"
D,E - 3/16"
F,G,H and a body tube less than 2.6" - 1/4"
F,G,H,I w/ 2.6" to 4.0" body - 7/16"
I,J - 1/2"

Over J and body tube over should use rail buttons

Minimum Speed for Stable Flight
44 fps (30mph) is generally accepted as a minimum safe speed for stable flight. Faster speeds are necessary to achieve stability in windy conditions.

Mounting launch lug(s)/button/s
When mounting a single lug, cover the center of gravity with the lug. Always mount at least two rail buttons. When mounting two lugs or buttons, mount the lower piece at the rear of the airframe. The second should be on or just behind the center of gravity.

Submitted by Tom Savoie

 

Published in Learning
Sunday, 02 February 2003 17:00

The Importance of Procedures

Originally printed in Extreme Rocketry Magazine

Rocketry is one of those things you do in life that has no in-between. You have either a complete success, or an unmitigated disaster. Every flight, including failures, is a new andunforgettable learning experience. While some of the disasters can be attributed to bad or defective equipment or materials, a lot of failures can be attributed to incorrect preparation.

You certainly feel bad when you forget wadding in your Big Bertha, but it pales in comparison to forgetting something when flying your Big Kahuna. And the more we pay attention to the successes and failures of others and ourselves, the more we learn and the better our chances are for successful flights in the future.

Flights with a regular model rocket are basic. Wadding-parachute-motor-igniter-plug and you're off to get a launch pad. Mid- and high-power rockets are more complex, so more things can go wrong. The lack of proper preparation reminds me of one flight I saw. The rocket represented a considerable investment of time, effort and money for this person. The lift-off, boost and coast were perfect, and separation charge fired at apogee. However, during separation, everybody saw the one little "oops" this rocketeer forgot: to fasten the shock cord to both sections of the rocket. The upper part of the rocket came in under parachute, but the booster came in ballistic. Ouch.

Trying to document all of the possible ways to go wrong would fill a James Michner novel. Here is a small list of failures what I have either witnessed or been guilty of myself: All it takes is something like a forgotten O-ring in the motor and you get a CATO. Or there's not fastening the shock cord correctly and you get more pieces coming down than went up. Forgetting to arm the recovery electronics gets you a ballistic rather than parachute recovery. Using the wrong size launch rod will send your rocket off in unwanted directions, if it cleared the rod at all. Forgetting wadding turns your parachute into either a melted wad or the equivalent of a screen door, both bad for future flights. Not verifying your CG on assembly can turn your vertical flight into a horizontal one. That's not a good way to get the crowd to do the Wave.

Since we are all rocket scientists, I decided to take a "page" from the professional rocket scientists and write check-off lists, or "procedures" as they call them, for rocket preparation and launch evolutions. Even in the middle of the Apollo 13 disaster, everybody had a procedure for everything. If there wasn't one, you wrote it to make sure everybody was clear on what they needed to have and what they were supposed to do. This made sure everybody was "on the same page."

Procedures are essential to a person like me. I would forget my head, as the saying goes, if it wasn't permanently attached. I run down a procedure to make sure I don't forget something every time I leave the house. If I didn't, I would leave at least one essential thing behind, every time. I started using procedures years ago when I was SCUBA diving. It is embarrassing to get to the dive site and discover you forgot your weight belt, regulator or fins (or all of them) as I did on several occasions.

The source of my organization comes from my Palm Pilot. Not only do I use it to help keep me organized, I can also recover flight data from my onboard computer into it while on the flight line as well. I mention Palm specifically because there is a shareware program called HandyShopper that I use for these lists. I use the Aisle #'s as step #'s so that I can easily adjust the order of things in a procedure if I have to. In practice, after completing a step, I merely check it off, just like if I had just grabbed the bread or eggs. If you don't have a handheld computer, clipboards and paper served the professionals for years.

The best way to develop your own procedures is to sit in a quiet area and go through everything in your mind, start to finish. After you have imagined them, write them down and go through the list again. Then go and perform the procedure, adding notes and adding/changing steps as you go. As with all endeavors in our lives, your mileage may vary. The standard that you should aim for is that anybody can understand and complete your procedures. Imagine yourself in a full body cast with your jaw wired shut. A fellow rocketeer of approximate experience should be able to get you to the range, prep and fly your rocket without any "input" from you.

The first list is the material preparation procedure. You make sure your rockets are ready, double check you have everything, test electronics, dip a few igniters, whatever you need to do to make yourself ready. This will prevent the proverbial running around like a headless chicken the morning of the launch, which cuts into flying time. Doing this over an evening or two during the week gets you 90% ready. All you have to do the night before is quickly check everything before packing it into the car to make sure no one has "borrowed" something. I verify my range box, motor box, etc. are properly stocked by writing in the bottom or on the cover of every compartment what is supposed to be there, so anything missing jumps out you.

Next you can concentrate on the family. Lay out clothes for everybody, make sure your club ID's, cash for range fees and so on are on hand (preferably packed in your range box).

The next procedure is car-packing. The order that I use to pack the vehicle is the opposite of what I will need on the range. Things that have to come out first (tables, chairs, etc.) go in last. If you pack everything but food and drink the night before, you can do it calmly and you have the time and leisure to double-check and properly secure the items. You also make sure the vehicle is up to the job. Check the fluids, tires, gas and so on. If your alarm doesn't go off and you wake up late on launch day, you can jump into your clothes, dash out to the car and drive off, with the worst consequences being you have forgotten food, drinks and family members.

Once you are on the range and set up, you can relax a bit and take a break. Fly some model rockets, catch up with club members, volunteer as RSO/LCO for a shift, whatever. Your prior planning has given you this break.

Once you are ready to launch a big rocket, pull out its' pre-flight procedure. You will probably need an individual procedure for each of your HPR rockets. This procedure should take your rocket from cold (unprepared) to warm (ready for RSO and the launch pad). The number of individual steps is not important. Clarity of the steps is important. Thirty-seven steps to load and secure the motor into the rocket might be a bit of overkill, but you don't want to have just "stick it in and tape it down" either. Make sure your flight card is filled out, electronics are installed and ready, your CP/CG ratio is good and everything is connected and ready to go.

Now comes the final countdown. Get your rocket approved by the RSO, draw a pad from the LCO, and head out with the rocket and your final preparation procedure. Verify the launch pad can handle your rocket, put the rocket on the pad, insert the igniter, arm the electronics, take the rocket from warm to hot (ready) and head back to the range head to ready your cameras.

If you have invested the time in developing your procedures, you have eliminated 98% of human error on your part. You have done everything you could to ensure a safe flight that ends in a recovered rocket.

The investment of time you spend at home developing these procedures will save countless hours and rockets on the range. As the military puts it, "The more you sweat in peacetime, the less you will bleed in wartime."

Safe and successful flying!

Remember, the things you need FIRST go in LAST.

Range Box Procedure

  • Check drawers
  • FRS Radios, load with fresh batteries
  • Forceps
  • Scissors
  • Hammer
  • Wet Wipes
  • Weather Station
  • Talcum Powder
  • Tempura Powder
  • Club ID Badges
  • Cash for Range Fees
  • Cash for Concessions

Car Loading Procedure

  • Check vehicle fluids (gas, oil, collent, etc.)
  • Rocket Box
  • Motor Box
  • HPR rockets
  • HPR launch pad(s)
  • Camera bag
  • Camera tripod
  • Laptop and AC inverter
  • Weather station
  • Tent/sunshade
  • Chairs
  • Table

Departure Procedure

  • Load Food, sodas and ice into cooler
  • Fill canteens and place into cooler
  • Load cooler into vehicle
  • Load family members into vehicle

HPR rocket Prep procedure (Cold to Warm)

  • Remove and disassemble electronics bay
  • Install fresh batteries in all electronics
  • Activate flight computer(s), verify units are operational
  • Mount computer(s) into bulkhead
  • Prepare ejection charges
  • Mount ejection charges; wire them to flight computer(s)
  • Reassemble electronics bay
  • Attach shock cord from booster to electronics bay
  • Attach shock cord from electronics bay to payload bay
  • Attach parachute to payload section
  • Attach streamer to electronics bay
  • Assemble motor(s) per manufacturer's directions
  • Slide motor(s) into motor mount tubes
  • Secure motor(s) by using MMT hardware
  • Verify launch weight
  • Verify Center of Gravity
  • Verify projected apogee doesn't break waiver
  • Fill out Flight Card
  • Take rocket to RSO

HPR Rocket Pre-Launch Procedure (Warm to Hot)

  • Take rocket to assigned pad
  • Verify pad will hold rocket properly
  • Mount proper rod/rail onto pad
  • Tilt pad, slide rocket onto rod/rail
  • Tilt pad/rocket upright
  • Insert igniters into motor(s)
  • Activate and final check electronics
  • Verify pad power is OFF
  • Attach launch clips to igniter(s)
  • Return to Safe Area
  • Ready cameras
  • Give final GO to LSO
Published in Learning
Page 1 of 2

Search our Site

Fred Williams Memorial - ...

November
Saturday
4
This launch is ONLY for people competing in the competition, no high power flights will be taking place. Please contact naradvisor@uroc.org for further details. Event will take place...
08:00 AM

Member Meeting

November
Monday
13
Officer Elections for the 2018 year.
07:00 PM

Contact Details

Call Us
+1(801) 893-1074
Mailing Address
PO Box 26584, Salt Lake City, UT 84126
Questions?
info@uroc.org

About UROC

The Utah Rocket Club is an Not for Profit organization dedicated to the promotion of safe and fun activities for people of all ages through the sport, science, and hobby of rocketry. The Utah Rocket Club supports the community through educational presentations, demonstration launches and displays for youth groups, nonprofit organizations, etc.

Learn More